Tangent Galvanometer
Catalogue No: 1070820
Comprises a circular coil wound on non magnetic bobbin of bakelite about 160mm in diameter mounted vertically on a non magnetic, cast metal base, with the coil width very small as compared to its diameter. A compass box (magnetometer) is located at the center of the coil to make its needle experience uniform magnetic field due to current in the coil. The coil consists of three windings of enameled copper wire of different SWG. one each of 2, 50 and 500 turns. A circular platform on base carries a set of four socket terminal for connection to the coils and marked for each coil.
* Tangent Galvanometer
Pack of (Pcs): 1
Comprises a circular coil wound on non magnetic bobbin of bakelite about 160mm in diameter mounted vertically on a non magnetic, cast metal base, with the coil width very small as compared to its diameter. A compass box (magnetometer) is located at the center of the coil to make its needle experience uniform magnetic field due to current in the coil. The coil consists of three windings of enameled copper wire of different SWG. one each of 2, 50 and 500 turns. A circular platform on base carries a set of four socket terminal for connection to the coils and marked for each coil.
* Tangent Galvanometer
Related products
-
-
-
Mechanics, Physics
Bench Clamp Fitting Pulley-Cast Metal, 50mm
Catalogue No: 1030240/1
Comprising a 50mm diameter Aluminium pulley mounted in a frame on cone bearings, meant primarily for clamping to the edge of a work-bench, table etc., with the pulley overhanging the edge and in a vertical plane. Overall length of frame (pulley bar) about 110mm. Maximum clamp opening 25mm.
* Pulley Dia: 50mm
* Frame: Cast Metal
* Pulley Material: AluminiumPack of (Pcs): 1
SKU: 1030240/1 -
-
Heat, Physics
Joule And Watt Meter
Catalogue No: 1060950
Electrical energy consumed by a load with power is directly indicated on the front panel meter with a single selection switch. One can see either energy or power consumed by the applied load. Even we can use this instrument with data logger. A potential difference of 0-1V will generate on pulse output sockets. Max. input voltage for the meter is 24V D.C and 17V A.C with 10A max. current. Load current can be controlled by just rotating the knob fitted on the front panel indicated with load current.
Pack of (Pcs): 1
SKU: 1060950
